All our floor sanding is dust free, however, if your floor requires more brutal floor sanding to remove stubborn areas, then other machinery may need to be used and in this case, slight dust should be expected. We suggest that [...]
We are able, by arrangement, to work weekends and/or overnight and, if need be, we can separate sections of a floor and barrier tape off, to avoid any footfall whilst the floor is being renovated. This applies to most commercial [...]
Yes, we can arrange carpet removal upon request. Commercially, we are charged at refuse sites for disposing of trade waste and, therefore, a minimal charge is made for this service.
Staples can normally be removed as part of the floor sanding process. Any protruding nails need to be counter sunk and we are able to do this for you when sanding a floor.
Yes, we are able to remove a top section of the concrete and prepare it to have reclaimed boards installed. There is an additional cost for this. Please mention this when requesting a quote.
Whilst we ask you to remove all items for the room being sanded, we are happy to assist in moving more bulky pieces of furniture upon request. Every care is taken when doing this but, unfortunately, our insurances do not [...]
Yes. Dust mites are responsible for many asthma related conditions and allergies and they obviously live in carpets and soft furnishings. Dust mites are significantly reduced by having wooden floors and are, therefore, ideal for asthma sufferers, as well as [...]
So long as we are aware of these, we will come to site with reclaimed boards to suit and will replace these at our standard hourly labour charge.
If you have the luxury of choice, we would recommend that you have your floors renovated prior to decorating and then to protect your sanded floors sufficiently to avoid any damage, when your room is going to be decorated. When [...]
Successful gap filling on wooden floors is one of the skilled parts of floor finishing - a lot of floor sanding companies can't or won't do this. The most successful way despite taking longer is, (for gaps less than 4mm [...]
